Imer Small 50 Grout Pump and Material Sprayer

Lease this Item for ONLY $131.28/month

The all new Imer Small 50 spray pump applies to all types of finish coatings. Quickly and easily apply materials such as plasters, mortars, stucco (cement and synthetic based) fire proofing, sound proofing and paint. Use it to pump grout to fill blocks, metal door bucks, self leveling materials, epoxy, and almost any material with aggregate no bigger than 1/4". The Imer grout pump even works well on small slab jacking projects.

The pump is controlled by the operator either with the 5 volt remote start/stop or, when used with the optional diaphragm compressor, is controlled with the open and closing of the valve at the gun. 115v plugged into a regular wall outlet is all it takes to run this unit with its inverter technology. Even running over 100' of extension cord does not take away from this flawless piece of equipment. A rheostat controls the motor RPM which means that you have total control of the flow to match with the material being applied. All of the operation is controlled by the panel which can detect the wrong voltage and shut down as a safety. The unit will sense a jamb and cut the power to the pump. An error message followed by a number will display to help you with the troubleshooting. Thermal overloads are in place on the 100% duty cycle motor. This means that the motor can run all day, every day. The control panel will sense an overload before the thermal protection on the motor. This is just the level of how safe, secure and sophisticated this machine is.

The optional compressor is needed when used for spraying applications. The oil-less, continuous flow, low PSI high CFM compressor is the lungs of the unit. The pumping action is all on the operator. With the air valve closed the compressor senses back pressure and turns off the compressor and the pump motor. When the valve is re-opened the compressor and the pump kick on again to start where you left off. The compressor is very low maintenance and comes with an extra seal kit. The only real maintenance is air filters which are standard size that can be purchased at any tool store.

There are 2 different nozzles for spraying. One is for heavy materials that needs to be built up such as fire proofing materials and mortars. The other nozzle is used for spraying of thinner coats such as acrylic stucco and coatings. This nozzle comes with different orifice sizes and when used without the compressor, makes a great tool for pointing, filling in cracks and joints in between stone walls. The optional vibrating screen is needed when using your own loose material. This screen helps prevent large debris and stones from entering into the stator and screw which will cause a jamb. The vibrator will allow for stones up to 1/4" in size. If you are using bagged, pre-blended material then this option is not necessary. The unit plugs right into the alloted outlet for this vibrator. It is also controlled right on the panel with an on/ off switch.

If you are in the market for a spray and grout pump, then look no further than this machine. It is truly impressive and you won't believe the production coming from such a small unit. Get ready to make more profits.

Imer Small 50 Grout Pump and Material Sprayer