|
The SV750 Electric Submersible Trash Pumps are equipped with Vortex impellers, undoubtedly the best non-clog impellers ever invented for the handling of mud, raw sewage, viscous liquids, rags, wood chips and other solids. They pass solid up to 90% of pump outlet diameter.
|
BJM SV750 Electric Submersible Trash Pump |
SV750 Electric Submersible Trash Pump Features:
• Tough Pump Construction – Hardened cast iron stands up to rough handling and pumping sandy water unlike pumps with soft resin impellers or plastic exterior components.
• More Motor Protection – Winding protection and (NEMA) Class F motor insulation allows motor temperature to raise to 230°F, superior to pumps with Class A and B insulation. Automatic switch turns pump motor off if temperature and/or amp draw raises too high. When the motor cools the switch will automatically reset and the pump will turn back on.
• Three Seal Motor Protection - Motor is protected by double mechanical seals. Lower seal made of silicon carbide/silicon carbide and upper seal is made of carbon/ceramic. An additional lip seal has been installed above the impeller, to help prevent abrasives such as dirt, silt or sand, from entering into the seal chamber.
• 304SS Motor Housing – Superior abrasion resistance will not wear out like aluminum motor housings when pumping sandy water.
• Longer Power Cord– Standard 33ft. power cord on pumps ½ HP and below and 50ft. on pumps 1HP and above.
|
|
|
|
|
|
|
|
|
|
|
|
|
|
| Gallons Per Minute (GPM) |
100 |
|
|
|
|
|
|
|
|
| Dimension |
19 X
11 X
11
in
|
|
|
|
| |
Web Id |
Item Name |
Price |
Quantity |
|
BJM0006
|
Description