Atlas Copco Concrete Breakers & Power Packs

Atlas Copco mining equipment has over 130 years of experience manufacturing products ranging from compressed air equipment, to construction and other equipment. Atlas Copco is an industrial group with world-leading positions in compressors, construction and mining equipment, pneumatic concrete breakers, power tools and assembly systems. Atlas Copco aims to provide innovation for increased efficiency and productivity in the construction industry.
Read More
Browse Atlas Copco rock drills and more below.
Read Less

Popularity
Set Descending Direction

Grid List

30 per page

Items 1 to 30 of 87 total

Page:
  1. 1
  2. 2
  3. 3
  1. Atlas Copco LED light tower HiLight V5+ Light Tower 8161004968

    Starting At $11,896.00
    The HiLight V5+ offers significant fuels savings of up to 60% when compared to the typical fuel consumption of 6kW Metal Halide solution, creating industry leading competitive advantage.The extended safety features give users complete peace of mind, even in the most demanding conditions. The light towers can be transported with their masts in a vertical position, enabling safer transportation and installation. As a result, it is possible to transport up to 20 units on a single truck, while eliminating the time-consuming and costly problem of bulbs being broken during the shipping process. Learn More
    loading
  2. Atlas Copco TEX 03 PS Pneumatic standard hammer Kit

    Starting At $742.00
    The smallest models, such as TEX 03 PS and TEX 05 P, are light enough even for overhead work and help you get in close behind pillars and under stairs when doing renovation work. Learn More
    loading
  3. Atlas Copco TEX 05P Pneumatic standard hammer Kit(Shank Hex 3/4" x 2")

    Starting At $686.00
    The smallest models, such as TEX 03 PS and TEX 05 P, are light enough even for overhead work and help you get in close behind pillars and under stairs when doing renovation work. Learn More
    loading
  4. Atlas Copco DKR 36 Pneumatic Combi drill/hammer(Hex)

    Starting At $1,236.00
    A silenced hand-held rotary plug hole drill/hammer for working in stone and concrete.The tool is both a drill and a chipping hammer.The DKR 36 is small enough to fit in a (very deep) pocket and strong enough to do both chipping and drilling.The quick-release chuck is a money saver. It helps you change between drilling and chipping operations and you can do more work in shorter time. Lubrication is especially important to think about when you are drilling. With the DKR 36 you can concentrate on the task at hand. A built-in lubricator lasts a whole normal shift and helps keep the drill chipper and tools in shape. There is almost always a use for it, and the weight helps you work in almost impossible positions. You can go overhead or under water. Divers especially like this model because they can do so much with it – anything from underwater drilling to chipping – thanks to low feed force. Learn More
    loading
  5. Atlas Copco SDS Plus adapter for DKR 36R

    Starting At $205.00
    Atlas Copco SDS Plus adapter for DKR 36R Learn More
    loading
  6. Atlas Copco BBD 15E Pneumatic rock drill

    Starting At $3,657.00
    The BBD drills are light and easy to handle, which makes them ideal for those quick jobs and for working in difficult-to-get-to areas.The medium-weight BBD15E has a combined ”T/D handle” that make it easy for you to carry. It offers a high power-to weight ratio and a high operational safety. The E means it’s equipped with spring dampened handles and a highly effective silencer. Learn More
    loading
  7. Atlas Copco BBD 15ET Pneumatic rock drill (shank-7/8" x 4 1/4") w/Trigger

    Starting At $3,657.00
    The BBD drills are light and easy to handle, which makes them ideal for those quick jobs and for working in difficult-to-get-to areas.The medium-weight BBD15ET has a combined ”T/D handle” that make it easy for you to carry. It offers a high power-to weight ratio and a high operational safety. The E means it’s equipped with spring dampened handles and a highly effective silencer. The largest BBD drill is available in a version with a trigger valve, BBD 15ET. Learn More
    loading
  8. Atlas Copco RH 571-5L Pneumatic rock drill

    Starting At $2,531.00
    Thanks to the robust rifle-bar rotation mechanism and high impact energy for drilling in hard rock, the lightweight RH 571 is perfect for smaller jobs. All models are equipped with T-handles to give you a solid, comfortable grip. Learn More
    loading
  9. Atlas Copco RH 572 E Pneumatic rock drill (shank-7/8" x 4 1/4")

    Starting At $3,657.00
    The RH drills were the backbone of the Swedish Method. And after more than 60 years development they are still on top. Learn More
    loading
  10. Atlas Copco RH 658-L Pneumatic rock drill

    Starting At $2,838.00
    The RH 658 is slightly heavier and more powerful than its little sister. That means it can drill deeper.All RH-models have built in air flushing. A direct air flow within the drill steel removes drill chippings and prevents the drill from jamming.Production drilling in quarry and dimension stone industry. Learn More
    loading
  11. Atlas Copco BBD 12 Series Pneumatic rock drill

    Starting At $2,838.00
    The BBD drills are light and easy to handle, which makes them ideal for those quick jobs and for working in difficult-to-get-to areas.Equipped with a D-type handle, it is used for horizontal drilling, plug hole drilling, and drilling in concrete to a maximum depth of one meter. Learn More
    loading
  12. Atlas Copco Cobra Combi Drill/Breaker

    Starting At $6,680.00
    The Atlas Copco Cobra Combination Drill/Breaker is the king of multi-purpose use to Split rocks, break concrete, drive posts, tamp and drill.Cobra Combi is a great breaker aimed at lighter materials. Impact rate is higher and impact energy is lower compared to its brothers. And when you combine high impact rate and lower impact energy with rotation, you get a very powerful drill. This multi-purpose machine can drill up to 30 cm per minute in solid granite and to depths of up to two metres, thanks to its built-in airflushing device. Learn More
    loading
  13. Atlas Copco Cobra PROi Series Gas Breaker/ rock drill

    Starting At $5,255.00
    The First fuel-injected Gasoline breaker uses Less fuel and has more power and easier starts regardless of climate and altitude. Learn More
    loading
  14. Atlas Copco Cobra TTe Series Gas Tie tamper/Breaker

    Starting At $5,000.00
    The Cobra TTe is optimized for railway applications and especially designed for tie tamping. It works at the relatively high frequency of 1,620 blows/min. Its impact energy is high enough to push the ballast back under the ties and low enough to prevent pulverization of ballast. The petrol-driven breaker is ideal for tie tamping in more ways. You don’t have to worry about compressors, hoses or cables, which makes it easy and safe to move around in rail yards and other high-risk environments with constant heavy traffic. Learn More
    loading
  15. Atlas Copco TEX 40PE Pneumatic Heavy Breaker

    Starting At $2,434.00
    The TEX 40 models are heavy duty general demolition breakers used in a number of applications on medium hard to hard materials. They are well proven in both asphalt and concrete.. Learn More
    loading
  16. Atlas Copco TEX P90 Pneumatic Heavy Breaker

    Starting At $1,574.00
    A solid body concept from a single cast reduces the need for bolts that might break. The anvil block has been refined to handle and deliver impact energy. But heavy tools and massive power means a lot of responsibility on our behalf. We are specially proud of HAPS (Hand Arm Protection System) that reduce vibration levels and allow up to seven times as much trigger time compared to a conventional breaker. Together with the slim polyurethane silencer that reduces noise by 75 percent. Learn More
    loading
  17. Atlas Copco R-TEX Series Pneumatic light breaker

    Starting At $1,600.00
    The RTEX pays for itself. A comparable TEX uses 34 litres of air per second. The RTEX only use 18 litres per second! That saves you money on fuel by allowing you to downsize on the compressor or run several breakers on the existing equipment. Learn More
    loading
  18. Atlas Copco LP 13-30 P PAC Hydraulic Power Pack

    Starting At $6,200.00
    A gasoline driven hydraulic power pack with a 13 horse power Honda GX 390 engine that runs at 3600 rotations per minute. Learn More
    loading
  19. Atlas Copco 14" Spade

    Starting At $88.99
    Accessory to the Atlas Copco LH 39 Heavy Duty Hydraulic Breaker. Learn More
    loading
  20. Atlas Copco Metal halide HiLight V4 W 60htz Light Tower 8161004570

    Starting At $9,998.00
    The HiLight V4 light towers offer increased serviceability with wide wing doors and all components easily accessible. Environmental considerations have also been taken into account, with a frame design that prevents oil, fluids and fuel from leaking out and contaminating the ground. The extended safety features give users complete peace of mind, even in the most demanding conditions. The light towers can be transported with their masts in a vertical position, enabling safer transportation and installation. As a result, it is possible to transport up to 20 units on a single truck, while eliminating the time-consuming and costly problem of bulbs being broken during the shipping process. Learn More
    loading
  21. Atlas Copco LP 13-20 DE PAC Hydraulic power pack

    Starting At $6,270.00
    A Diesel driven hydraulic power pack with a 10 HP Lombardini Engine, you can easily move the power pack with the help of a friend. And it fits in a service van.A robust frame and strong panels protect all vital parts. All service points are easily accessible.One person can easily move the power pack around the site thanks to the foldable handle and the large wheels. The variable flow on/off valve allows for easy tool change and slow start-up. Learn More
    loading
  22. Atlas Copco LP 18 Twin PE Hydraulic power pack

    Starting At $8,390.00
    A gasoline driven hydraulic power pack with a 18 HP B&S Vanguard Engine, this power pack comes with the twin version you can use two tools at the same time. High efficiency and save time.Correct working temperatures are achieved within minutes – even during the winter.This hydraulic regulatory system automatically idles the engine when the tool is not in use, and speeds it up when the tool is reactivated.The variable flow on/off valve allows for easy tool change and slow start-up. Learn More
    loading
  23. Atlas Copco LP 9-20 P PAC Hydraulic Power Pack

    Starting At $5,250.00
    A gasoline driven hydraulic power pack with a 9 HP Honda Engine, this power pack is Light and compact, so Two people can lift and carry the power packs with ease. And they’re so small you can stack them on a shelf or in a minivan.The high power to weight ratio means you save both manpower and fuel during transport. Foldable handles and big wheels also makes it easy to move the power pack around the work site. Learn More
    loading
  24. Atlas Copco LCD 1500 Hydraulic Core Drill

    Starting At $3,025.00
    This hydraulic core drill is designed to work under unfavorable circumstances and in tight spots. Learn More
    loading
  25. Atlas Copco 33 Foot 3" Discharge Hose

    Starting At $267.00
    Atlas Copco 33 Foot 3" Discharge Hose Learn More
    loading
  26. Atlas Copco TEX 150PE Pneumatic light breaker (1"x4 1/4")

    Starting At $1,744.00
    The TEX 150PE light breaker can handle most tasks. And just like you, they’re unique. The Solid body design means the whole breaker is made from one single casting. Thanks to the technology, we can skip the bolts that are often used to keep the machine together. In fact, our breakers have between 25 and 35 less parts than other breakers. Fewer parts make simple servicing and better reliability. For you that translate to a little more done every day and a lot of time saved each month. Learn More
    loading
  27. Atlas Copco TEX 140P Series Pneumatic light breaker

    Starting At $1,353.00
    The TEX 140 P light breaker can handle most tasks. And just like you, they’re unique. The Solid body design means the whole breaker is made from one single casting. Thanks to the technology, we can skip the bolts that are often used to keep the machine together. In fact, our breakers have between 25 and 35 less parts than other breakers. Fewer parts make simple servicing and better reliability. For you that translate to a little more done every day and a lot of time saved each month. Learn More
    loading
  28. Atlas Copco LTP 3 KIT Hydraulic Trash Pump

    Starting At $4,297.00
    The three inch submersible trash pump can be used in general construction, road services, in municipalities, water and waste utilities or rescue services. But it can also handle more extreme contamination. It pumps mud and slurries containing stones and particles of up to 60 mm.Atlas Copco Hydraulic Submersible pumps are used in a wide range of applications. They are great at continuous pumping of clean or contaminated water on building sites. And they do an excellent job in flooded excavations and cellars.Our pumps are driven by a built-in hydraulic motor featureing a special drive shaft, seal and bearings. The pumps are cooled and lubricated by the hydraulic oil and can be left to run dry without damage.The performance is impressive considering their size and weight. They provide a head of 32 meters and an output of 1,920 l/min. Learn More
    loading
  29. Atlas Copco LCD 500 Hydraulic Core Drill

    Starting At $3,025.00
    This hydraulic core drill is designed to work under unfavorable circumstances and in tight spots. Learn More
    loading
  30. Atlas Copco DKR 36R Pneumatic Combi drill/hammer(Round)

    Starting At $1,236.00
    A silenced hand-held rotary plug hole drill/hammer for working in stone and concrete.The tool is both a drill and a chipping hammer.The DKR 36 is small enough to fit in a (very deep) pocket and strong enough to do both chipping and drilling.The quick-release chuck is a money saver. It helps you change between drilling and chipping operations and you can do more work in shorter time. Lubrication is especially important to think about when you are drilling. With the DKR 36 you can concentrate on the task at hand. A built-in lubricator lasts a whole normal shift and helps keep the drill chipper and tools in shape. There is almost always a use for it, and the weight helps you work in almost impossible positions. You can go overhead or under water. Divers especially like this model because they can do so much with it – anything from underwater drilling to chipping – thanks to low feed force. Learn More
    loading
Popularity
Set Descending Direction

Grid List

30 per page

Items 1 to 30 of 87 total

Page:
  1. 1
  2. 2
  3. 3