Core Drills
Husqvarna DM230 Handheld Drill Motor-968411301
Details
- Husqvarna DM230 Handheld Drill Motor-968411301
- 3 speed 2.3 HP, 1 phase electric motor
- Maximum Bit Diameter handheld: 4"
- Maximum Bit Diameter in stand: 6"
- 230/115 Volts
- Rated Current Amps: 1850
- Recommended Generator Size: 3,500 W
- Spindle Speed no load: 730/1700/3600 rpm
- Spindle Speed full load: 580/1400/2900
- Dry and wet drilling: Easy to switch between dry and wet drilling
- Smooth start with normal fuses: Softstart™ lowers incoming current to reduce amperage when starting the motor.
- Elgard™:The machine uses pulsation to warn you of an approaching overload. This increases productivity and extends product life.
- Reliable gearbox Watercooled 3 speed gearbox for optimal drilling performance and longer service intervals.
- Smart Start®:Used with starting a hole, speed is reduced by half using the Smart Start® button, which reduces vibration.
- Softstart™:An electronic current limiter for soft starts with normal fuses. This gives you a smooth start with high productivity and reduces initial load on motor.
- Easy start with reduced speed. Used with starting a hole, speed is reduced by half using the Smart Start® button, which reduces vibration.shows when the machine is in a vertical, horizontal or preferred angled position.
- Overload protection:The machine uses pulsation to warn you of an approaching overload. If the load is not reduced the motor will shut off, to prevent overheating. Elgard™ increases productivity and extends product life.
- Durable and ergonomic design: Durable and shock-proof, designed to protect the electronics. Easy to carry and install thanks to low weight and ergonomic design.
- Used to drill holes for stairs and barriers. Also used for ventilation channels,and holes for pipes and cables
Model Number: | 968411301 |
Power Type: | Electric |
Horsepower HP: | 2.3 |
Max Core Bit Size: | 6" |
Features
Details
- Husqvarna DM230 Handheld Drill Motor-968411301
- 3 speed 2.3 HP, 1 phase electric motor
- Maximum Bit Diameter handheld: 4"
- Maximum Bit Diameter in stand: 6"
- 230/115 Volts
- Rated Current Amps: 1850
- Recommended Generator Size: 3,500 W
- Spindle Speed no load: 730/1700/3600 rpm
- Spindle Speed full load: 580/1400/2900
- Dry and wet drilling: Easy to switch between dry and wet drilling
- Smooth start with normal fuses: Softstart™ lowers incoming current to reduce amperage when starting the motor.
- Elgard™:The machine uses pulsation to warn you of an approaching overload. This increases productivity and extends product life.
- Reliable gearbox Watercooled 3 speed gearbox for optimal drilling performance and longer service intervals.
- Smart Start®:Used with starting a hole, speed is reduced by half using the Smart Start® button, which reduces vibration.
- Softstart™:An electronic current limiter for soft starts with normal fuses. This gives you a smooth start with high productivity and reduces initial load on motor.
- Easy start with reduced speed. Used with starting a hole, speed is reduced by half using the Smart Start® button, which reduces vibration.shows when the machine is in a vertical, horizontal or preferred angled position.
- Overload protection:The machine uses pulsation to warn you of an approaching overload. If the load is not reduced the motor will shut off, to prevent overheating. Elgard™ increases productivity and extends product life.
- Durable and ergonomic design: Durable and shock-proof, designed to protect the electronics. Easy to carry and install thanks to low weight and ergonomic design.
- Used to drill holes for stairs and barriers. Also used for ventilation channels,and holes for pipes and cables
Specifications
Model Number: | 968411301 |
Power Type: | Electric |
Horsepower HP: | 2.3 |
Max Core Bit Size: | 6" |