Concrete Breakers, Gas, Hydraulic & Pneumatic

A concrete breaker is a powerful percussion hammer that is fitted to an excavator to demo concrete structures or large rocks. It is powered by an auxiliary hydraulic system from the excavator, which is fitted with a foot-operated valve for this concrete demolishing purpose. To get through the concrete fast, use concrete breaker machines. There are many different attachments available and the useful machines can be found two different power types - either pneumatic concrete breakers or hydraulic concrete breakers.
Read More
Tough and contractor grade they will get your job done right. Purchase the available concrete breakers for sale below.
Read Less

Popularity
Set Descending Direction

Grid List

30 per page

14 Item(s)

  1. M260 APT Chipping Hammer .680 Round Nose Bushing 3" Stroke

    Starting At $582.00
    APT Chipping Hammers are used for work such as scaling chiseling removing concrete build-up from the inside of concrete mixers light concrete demolition cement finishing and form stripping. The 260 Series is equipped with the patented Automatic Ball Valve Learn More
    loading
  2. Atlas Copco TEX 03 PS Pneumatic standard hammer Kit

    Starting At $742.00
    The smallest models, such as TEX 03 PS and TEX 05 P, are light enough even for overhead work and help you get in close behind pillars and under stairs when doing renovation work. Learn More
    loading
  3. Atlas Copco DKR 36R Pneumatic Combi drill/hammer(Round)

    Starting At $1,236.00
    A silenced hand-held rotary plug hole drill/hammer for working in stone and concrete.The tool is both a drill and a chipping hammer.The DKR 36 is small enough to fit in a (very deep) pocket and strong enough to do both chipping and drilling.The quick-release chuck is a money saver. It helps you change between drilling and chipping operations and you can do more work in shorter time. Lubrication is especially important to think about when you are drilling. With the DKR 36 you can concentrate on the task at hand. A built-in lubricator lasts a whole normal shift and helps keep the drill chipper and tools in shape. There is almost always a use for it, and the weight helps you work in almost impossible positions. You can go overhead or under water. Divers especially like this model because they can do so much with it – anything from underwater drilling to chipping – thanks to low feed force. Learn More
    loading
  4. Atlas Copco TEX 05P Pneumatic standard hammer Kit(Shank Hex 3/4" x 2")

    Starting At $686.00
    The smallest models, such as TEX 03 PS and TEX 05 P, are light enough even for overhead work and help you get in close behind pillars and under stairs when doing renovation work. Learn More
    loading
  5. M650 APT Chipping Hammer .580 Hex Nose Bushing 4" Stroke

    Starting At $582.00
    APT Chipping Hammers are used for work such as scaling chiseling removing concrete build-up from the inside of concrete mixers light concrete demolition cement finishing and form stripping. Learn More
    loading
  6. Atlas Copco DKR 36 Pneumatic Combi drill/hammer(Hex)

    Starting At $1,236.00
    A silenced hand-held rotary plug hole drill/hammer for working in stone and concrete.The tool is both a drill and a chipping hammer.The DKR 36 is small enough to fit in a (very deep) pocket and strong enough to do both chipping and drilling.The quick-release chuck is a money saver. It helps you change between drilling and chipping operations and you can do more work in shorter time. Lubrication is especially important to think about when you are drilling. With the DKR 36 you can concentrate on the task at hand. A built-in lubricator lasts a whole normal shift and helps keep the drill chipper and tools in shape. There is almost always a use for it, and the weight helps you work in almost impossible positions. You can go overhead or under water. Divers especially like this model because they can do so much with it – anything from underwater drilling to chipping – thanks to low feed force. Learn More
    loading
  7. M650 APT Chipping Hammer .680 Round Nose Bushing 4" Stroke

    Starting At $582.00
    APT Chipping Hammers are used for work such as scaling chiseling removing concrete build-up from the inside of concrete mixers light concrete demolition cement finishing and form stripping. Learn More
    loading
  8. M650 APT Chipping Hammer .580 Hex Nose Bushing 3" Stroke

    Starting At $582.00
    APT Chipping Hammers are used for work such as scaling chiseling removing concrete build-up from the inside of concrete mixers light concrete demolition cement finishing and form stripping. Learn More
    loading
  9. M650 APT Chipping Hammer .680 Round Nose Bushing 3" Stroke

    Starting At $582.00
    APT Chipping Hammers are used for work such as scaling chiseling removing concrete build-up from the inside of concrete mixers light concrete demolition cement finishing and form stripping. Learn More
    loading
  10. M650 APT Chipping Hammer .580 Hex Nose Bushing 2" Stroke

    Starting At $582.00
    APT Chipping Hammers are used for work such as scaling chiseling removing concrete build-up from the inside of concrete mixers light concrete demolition cement finishing and form stripping. Learn More
    loading
  11. M650 APT Chipping Hammer .680 Round Nose Bushing 2" Stroke

    Starting At $582.00
    APT Chipping Hammers are used for work such as scaling chiseling removing concrete build-up from the inside of concrete mixers light concrete demolition cement finishing and form stripping. Learn More
    loading
  12. M260 APT Chipping Hammer .580 Hex Nose Bushing 4" Stroke

    Starting At $582.00
    APT Chipping Hammers are used for work such as scaling chiseling removing concrete build-up from the inside of concrete mixers light concrete demolition cement finishing and form stripping. The 260 Series is equipped with the patented Automatic Ball Valve Learn More
    loading
  13. M260 APT Chipping Hammer .680 Round Nose Bushing 4" Stroke

    Starting At $582.00
    APT Chipping Hammers are used for work such as scaling chiseling removing concrete build-up from the inside of concrete mixers light concrete demolition cement finishing and form stripping. The 260 Series is equipped with the patented Automatic Ball Valve Learn More
    loading
  14. M260 APT Chipping Hammer .580 Hex Nose Bushing 3" Stroke

    Starting At $582.00
    APT Chipping Hammers are used for work such as scaling chiseling removing concrete build-up from the inside of concrete mixers light concrete demolition cement finishing and form stripping. The 260 Series is equipped with the patented Automatic Ball Valve Learn More
    loading
Popularity
Set Descending Direction

Grid List

30 per page

14 Item(s)


A few of the lightweight cement breakers are designed with a D shaped handles that allow the operator to pick the breaker up and operate it horizontally as well as vertically. Like chipping hammers, concrete breaker machines can be powered either hydraulically, electrically, or pneumatically. The constant pounding action of breakers is normally slower than that of chipping hammers, ranging from 800 blows per minute to close to 2,000 blows per minute in comparison. Pavement breakers weigh from 30 to 100 pounds on some models. A good indication of a breaker's power is its weight. Pavement breakers weighing between 40 and 50 pounds are particularly useful for removing concrete for partial-depth pavement repair. The weight of these tools gives them the power needed to break up a just a few inches of concrete without being so heavy that they demolish the entire pavement area. The pavement breakers weighing more than 60 pounds can easily handle heavy demolition jobs with even reinforced concrete with rebar, and are used to demolish roads and very thick concrete. One example of the type of work that the heaviest breakers do is demolition of high strength reinforced concrete found on airport runways.