Concrete Scarifiers, Grinders, Shot Blasters

Grinding concrete can be a difficult job. To make it easier, see our catalog of concrete scarifiers and single or dual head concrete floor grinders. Available in gas, electric or propane you can get it done in the place you want it. You can also find ceiling grinders and flexible shafts. Other popular machines within this category include cement grinders, shot blasters and scabblers. Concrete Grinders will help you to grind down concrete efficiently.
Read More
All concrete grinders use some sort of abrasive to grind or polish such as diamond tools or Silicon carbide. The diamond tools used for grinding most commonly are diamond grinding cup wheels, and for polishing are usually diamond polishing pads. We boast a full array of accessories like scarifier carbide cutters, diamond disc and EDCO dyma certs or strip certs is available to you to explore. Find concrete planers and concrete grinders for sale below.
Read Less

Popularity
Set Descending Direction

Grid List

30 per page

17 Item(s)

  1. BW Manufacturing D-1800 Series Grinder System

    Starting At $82,476.00
    BW Manufacturing D-1800 Series Grinder System introduces the D-1800 the latest in state of the art surface preparation technology. The D-1800 is the response to years of contractors requests to solve the messy time consuming issue of dust removal from the machine. The hydraulic dump box gives you the ability to dump a 55 gallons worth of material in seconds. Other features for the new D-1800 include a newly designed blast head. The BH-18 Blast Head features the same feathered blast pattern found in the BH-16 while delivering increased production with a 2 wider path. Fully replaceable inner liners increase housing life. Cushioned swivel castors allow easy maneuvering over flat surfaces. Also newly designed seals floater plates and shot separator system allow an in increase output and decrease in shot consumption. Other chassis upgrades include a planetary gear drive for greater low end torque and faster drive speeds. Newly formatted controls and seating position give the operator a better view in front and behind machine attachments. A new tilted hood allows easier access for maintenance as well as other internal advancements to decrease service intervals and increase production. Learn More
    loading
  2. BW Manufacturing SCB-1200 Series Grinder System

    Starting At $43,522.00
    BW Manufacturing SCB-1200 Series Grinder System produced the only mid-sized ride on scarifying /shotblasting/diamond grinding/polishing machine in the market today. The SCB-1200 with SC-12 Scarifier Head attachment gives you mobility and versatility by being able to switch from scarifying to blasting in just minutes. With a state of the art scarifying head that is self-leveling to automatically adjust itself to different contours of the floor or pavement you will achieve an accurate removal of thin mill coatings to 1/4 Inch overlays. The SCB-1200 with SC-12 Scarifier Head attachment is ideal for use on rubber membranes mastics epoxy coatings and line stripes. The SCB-1200 with SC-12 Scarifier Head attachment will put you ahead of the competition with its production rates and the vacuum/collector system that eliminates dust and removes all material from the surface it is scarifying. Versatility is the key to the SCB-1200 with SC-12 Scarifier Head attachment. With quick-change cages allowing you to go from steel to carbide cutters and to different cutting width cages in just minutes. Designed with the operator in mind the SCB-1200 with SC-12 Scarifier Head attachment has easy to turn manual steering and ergonomically designed one- handed controls along with a removable dust containment box with wheels for ease of dumping. Using the latest technology in EPA approved liquid cooled diesel engines and catalytic converter you are far below any minimal emissions standards. With the use of state of the art components compressors electronic pulsation hydraulics and drives the SCB-1200 with SC-12 Scarifier Head attachment is the most reliable and productive mid-sized surface preparation machine on the market today. Learn More
    loading
  3. 10" Gas 13HP CPU-10FC Self Propelled Concrete Scarifier EDCO

    Starting At $10,449.85
    The 10" Gas 13HP CPU-10FC Self Propelled Concrete Scarifier EDCO is a 10" wide scarification machines can cover up to 750 sq. ft. in one hour. Learn More
    loading
  4. 50" Diesel 73HP D-1800 Ride On Diamond Grinder BW Manufacturing

    Starting At $87,826.00
    50" Diesel 73HP D-1800 Ride On Diamond Grinder BW Manufacturing introduces the D-1800 the latest in state of the art surface preparation technology. The D-1800 is the response to years of contractors requests to solve the messy time consuming issue of dust removal from the machine. The hydraulic dump box gives you the ability to dump a 55 gallons worth of material in seconds. Other features for the new D-1800 include a newly designed blast head. The BH-18 Blast Head features the same feathered blast pattern found in the BH-16 while delivering increased production with a 2 wider path. Fully replaceable inner liners increase housing life. Cushioned swivel castors allow easy maneuvering over flat surfaces. Also newly designed seals floater plates and shot separator system allow an in increase output and decrease in shot consumption. Other chassis upgrades include a planetary gear drive for greater low end torque and faster drive speeds. Newly formatted controls and seating position give the operator a better view in front and behind machine attachments. A new tilted hood allows easier access for maintenance as well as other internal advancements to decrease service intervals and increase production. Learn More
    loading
  5. 18" Diesel 73HP D-1800 Ride On Scarifier BW Manufacturing

    Starting At $82,476.00
    BW Manufacturing introduces the D-1800 the latest in state of the art surface preparation technology. The D-1800 is the response to years of contractors requests to solve the messy time consuming issue of dust removal from the machine. The hydraulic dump box gives you the ability to dump a 55 gallons worth of material in seconds. Other features for the new D-1800 include a newly designed blast head. The BH-18 Blast Head features the same feathered blast pattern found in the BH-16 while delivering increased production with a 2 wider path. Fully replaceable inner liners increase housing life. Cushioned swivel castors allow easy maneuvering over flat surfaces. Also newly designed seals floater plates and shot separator system allow an in increase output and decrease in shot consumption. Other chassis upgrades include a planetary gear drive for greater low end torque and faster drive speeds. Newly formatted controls and seating position give the operator a better view in front and behind machine attachments. A new tilted hood allows easier access for maintenance as well as other internal advancements to decrease service intervals and increase production. Shotblaster Applications Industrial Floors Bridge Decks Parking Decks Highways Line Stripes Airport Runways Aircraft Hangers Steel Decking Learn More
    loading
  6. 12" Electric 25HP SCB-1200-E Ride On Shot Blaster BW Manufacturing

    Starting At $45,196.00
    BW Manufacturing has produced the only mid-sized ride on surface preparation machine on the market. The SCB-1200 features a removable dust containment box with wheels for ease of dumping. One handed operation controls for raising and lowering heads grinder speed and diamond/shot engagement. The interchangeable heads gives you the mobility and versatility to switch applications in minutes. The state of the art BH-12 Shotblast Head attachment delivers a feathered blasting edge which enables each successive path to overlap without excessive penetration omitting the striping effect. Easy blast wheel replacement eliminates costly down time. The finished surface is ideal for thin-set applications clear coatings as well as having the power to give you an aggressive blast profile when needed. SHOTBLASTER APPLICATIONS: Industrial Floors Line Stripes Bridge Decks Airport Runways & Hangers Parking Decks Steel Decking Highways Learn More
    loading
  7. 12 inch Gas 38HP CPU-12FC Self Propelled Concrete Scarifier EDCO

    Starting At $19,734.32
    The 12" Gas 38HP CPU-12FC Self Propelled Concrete Scarifier EDCO self propelled scarifiers accommodate the largest of EDCO cutters for increased efficiency and a longer life. Propane gasoline and electric models are available. Learn More
    loading
  8. EDCO CD-5 5 Head Air Powered Chip Deck Scabbler 63100

    Starting At $10,617.57
    Great for getting rid of spalling concrete and roughening surfaces for new over-lays. Removes up to 250 square feet per hour. Learn More
    loading
  9. 18" Diesel 73HP D-1800 Ride On Shot Blaster BW Manufacturing

    Starting At $88,254.00
    BW Manufacturing introduces the D-1800 the latest in state of the art surface preparation technology. The D-1800 is the response to years of contractors requests to solve the messy time consuming issue of dust removal from the machine. The hydraulic dump box gives you the ability to dump a 55 gallons worth of material in seconds. Other features for the new D-1800 include a newly designed blast head. The BH-18 Blast Head features the same feathered blast pattern found in the BH-16 while delivering increased production with a 2 wider path. Fully replaceable inner liners increase housing life. Cushioned swivel castors allow easy maneuvering over flat surfaces. Also newly designed seals floater plates and shot separator system allow an in increase output and decrease in shot consumption. Other chassis upgrades include a planetary gear drive for greater low end torque and faster drive speeds. Newly formatted controls and seating position give the operator a better view in front and behind machine attachments. A new tilted hood allows easier access for maintenance as well as other internal advancements to decrease service intervals and increase production. Shotblaster Applications Industrial Floors Bridge Decks Parking Decks Highways Line Stripes Airport Runways Aircraft Hangers Steel Decking Learn More
    loading
  10. 12" Diesel 24HP SCB-1200-D Ride On Scarifier BW Manufacturing

    Starting At $43,522.00
    BW Manufacturing Inc. has produced the only mid-sized ride on scarifying /shotblasting/diamond grinding/polishing machine in the market today. The SCB-1200 with SC-12 Scarifier Head attachment gives you mobility and versatility by being able to switch from scarifying to blasting in just minutes. With a state of the art scarifying head that is self-leveling to automatically adjust itself to different contours of the floor or pavement you will achieve an accurate removal of thin mill coatings to 1/4 Inch overlays. The SCB-1200 with SC-12 Scarifier Head attachment is ideal for use on rubber membranes mastics epoxy coatings and line stripes. The SCB-1200 with SC-12 Scarifier Head attachment will put you ahead of the competition with its production rates and the vacuum/collector system that eliminates dust and removes all material from the surface it is scarifying. Versatility is the key to the SCB-1200 with SC-12 Scarifier Head attachment. With quick-change cages allowing you to go from steel to carbide cutters and to different cutting width cages in just minutes. Designed with the operator in mind the SCB-1200 with SC-12 Scarifier Head attachment has easy to turn manual steering and ergonomically designed one- handed controls along with a removable dust containment box with wheels for ease of dumping. Using the latest technology in EPA approved liquid cooled diesel engines and catalytic converter (optional) you are far below any minimal emissions standards. With the use of state of the art components compressors electronic pulsation hydraulics and drives the SCB-1200 with SC-12 Scarifier Head attachment is the most reliable and productive mid-sized surface preparation machine on the market today. Learn More
    loading
  11. 10 inch Electric 230V-3P CPU-10FC Self Propelled Concrete Scarifier EDCO

    Starting At $12,289.01
    The 10 inch Electric 230V-3P CPU-10FC Self Propelled Concrete Scarifier EDCO is a 10 inch wide scarification machines can cover up to 750 sq. ft. in one hour. Learn More
    loading
  12. 12" Electric 15HP 460V 3-P CPU-12FC Self Propelled Concrete Scarifier EDCO

    Starting At $25,302.88
    The 12" Electric 15HP 460V 3-P CPU-12FC Self Propelled Concrete Scarifier EDCO self propelled scarifiers accommodate the largest of EDCO cutters for increased efficiency and a longer life. Propane gasoline and electric models are available. Learn More
    loading
  13. 25" Diesel 24HP SCB-1200-D Ride On Diamond Grinder BW Manufacturing

    Starting At $45,932.00
    The 25" Diesel 24HP SCB-1200-D Ride On Diamond Grinder BW Manufacturing has produced the only mid-sized ride on surface preparation machine on the market. The SCB-1200 features a removable dust containment box with wheels for ease of dumping. The interchangeable shotblast/scarifier/diamond grinder polisher heads give you the mobility and versatility to switch applications in minutes. Ergonomically designed one handed operation controls for raising and lowering heads and easy to turn manual steering were designed with the contractor in mind. The DG-25 Diamond Grinder/Polisher attachment is unlike any other diamond grinder polisher on the market today. The DG-25 is designed for coating removal to high gloss polishing on totally dry concrete. A floating grinding head and specially designed shroud keeps the machine virtually dust free when connected to the SCB-1200 while removing all material off the surface and reducing clean up costs and effort. With twin one piece 16 rubber mounted grinding heads that are adjusted up and down using air pressure giving you infinite adjustability. The diamond segments can easily be interchanged from course diamonds for coating removal to fine resin pads for polishing. Diamond Grinder/Polisher Applications: Leveling Uneven Concrete Industrial Floors Concrete Polishing Garage Floors Coating Removal Learn More
    loading
  14. 12" Electric 25HP SCB-1200-E Ride On Scarifier BW Manufacturing

    Starting At $43,762.00
    B W Manufacturing Inc. has produced the only mid-sized ride on scarifying /shotblasting/diamond grinding/polishing machine in the market today. The SCB-1200 with SC-12 Scarifier Head attachment gives you mobility and versatility by being able to switch from scarifying to blasting in just minutes. With a state of the art scarifying head that is self-leveling to automatically adjust itself to different contours of the floor or pavement you will achieve an accurate removal of thin mill coatings to 1/4 Inch overlays. The SCB-1200 with SC-12 Scarifier Head attachment is ideal for use on rubber membranes mastics epoxy coatings and line stripes. The SCB-1200 with SC-12 Scarifier Head attachment will put you ahead of the competition with its production rates and the vacuum/collector system that eliminates dust and removes all material from the surface it is scarifying. Versatility is the key to the SCB-1200 with SC-12 Scarifier Head attachment. With quick-change cages allowing you to go from steel to carbide cutters and to different cutting width cages in just minutes. Designed with the operator in mind the SCB-1200 with SC-12 Scarifier Head attachment has easy to turn manual steering and ergonomically designed one- handed controls along with a removable dust containment box with wheels for ease of dumping. Using the latest technology in EPA approved liquid cooled diesel engines and catalytic converter you are far below any minimal emissions standards. With the use of state of the art components compressors electronic pulsation hydraulics and drives the SCB-1200 with SC-12 Scarifier Head attachment is the most reliable and productive mid-sized surface preparation machine on the market today. Learn More
    loading
  15. 10" Gas 20HP CPU-10FC Self Propelled Concrete Scarifier EDCO

    Starting At $13,529.58
    The 10" Gas 20HP CPU-10FC Self Propelled Concrete Scarifier EDCO is a 10" wide scarification machines can cover up to 750 sq. ft. in one hour. Learn More
    loading
  16. 25" Electric 25HP SCB-1200-E Ride On Diamond Grinder BW Manufacturing

    Starting At $45,692.00
    The 25" Electric 25HP SCB-1200-E Ride On Diamond Grinder BW Manufacturing has produced the only mid-sized ride on surface preparation machine on the market. The SCB-1200 features a removable dust containment box with wheels for ease of dumping. The interchangeable shotblast/scarifier/diamond grinder polisher heads give you the mobility and versatility to switch applications in minutes. Ergonomically designed one handed operation controls for raising and lowering heads and easy to turn manual steering were designed with the contractor in mind. The DG-25 Diamond Grinder/Polisher attachment is unlike any other diamond grinder polisher on the market today. The DG-25 is designed for coating removal to high gloss polishing on totally dry concrete. A floating grinding head and specially designed shroud keeps the machine virtually dust free when connected to the SCB-1200 while removing all material off the surface and reducing clean up costs and effort. With twin one piece 16 rubber mounted grinding heads that are adjusted up and down using air pressure giving you infinite adjustability. The diamond segments can easily be interchanged from course diamonds for coating removal to fine resin pads for polishing. Diamond Grinder/Polisher Applications: Leveling Uneven Concrete Industrial Floors Concrete Polishing Garage Floors Coating Removal Learn More
    loading
  17. 12" Diesel 24HP SCB-1200-D Ride On Shot Blaster BW Manufacturing

    Starting At $44,386.00
    The 12" Diesel 24HP SCB-1200-D Ride On Shot Blaster BW Manufacturing has produced the only mid-sized ride on surface preparation machine on the market. The SCB-1200 features a removable dust containment box with wheels for ease of dumping. One handed operation controls for raising and lowering heads grinder speed and diamond/shot engagement. The interchangeable heads gives you the mobility and versatility to switch applications in minutes. The state of the art BH-12 Shotblast Head attachment delivers a feathered blasting edge which enables each successive path to overlap without excessive penetration omitting the striping effect. Easy blast wheel replacement eliminates costly down time. The finished surface is ideal for thin-set applications clear coatings as well as having the power to give you an aggressive blast profile when needed. SHOTBLASTER APPLICATIONS: Industrial Floors Line Stripes Bridge Decks Airport Runways & Hangers Parking Decks Steel Decking Highways Learn More
    loading
Popularity
Set Descending Direction

Grid List

30 per page

17 Item(s)

If you are doing a job that requires removing a variety of coatings from floors like epoxy, painted thermo-plastic lines or even a coat of paint from your garage floor, you need to look no further than a single or dual head concrete floor grinder. Simply attach a tungsten carbide or segmented diamond plate to a concrete floor surface grinder by either EDCO, Target or MK Diamond, and you can easily remove paint, adhesives, mastics and more. These cement grinders can be cost effective compared with other coating removal methods. Most dual head concrete grinder heads rotate in the 200 to 250 RPM range. This speed is proven to be the best to maximize the removal amounts for a variety of materials and concrete thickness.